Impact sockets MT-IS
The MT-IS line of impact sockets and power sockets: hot-forged in high-strength alloy steel and heat-treated to withstand the highest torques of hydraulic and pneumatic wrenches.
- Drives from 3/8" to 3.1/2" and spline #5
- Hex, bi-hex and double-square configurations
- Standard and deep versions
MT-IS range by drive
Sockets available for every drive, in metric and imperial sizes: hex, bi-hex and double-square, standard and deep, up to 235 mm across flats.
| Drive | Metric range (mm) | Imperial range (A/F) | Configurations | Standard / Deep | Thin-wall |
|---|---|---|---|---|---|
| 3/8" | 8 – 22 | 5/16" – 7/8" | 6 / 12 pt | ✓ / ✓ | ✓ |
| 1/2" | 8 – 36 | 3/8" – 1.1/2" | 6 / 12 pt | ✓ / ✓ | ✓ |
| 3/4" | 17 – 60 | 9/16" – 2" | 6 / 8 / 12 pt | ✓ / ✓ | ✓ |
| 1" | 19 – 115 | 3/4" – 4.1/2" | 6 / 8 / 12 pt | ✓ / ✓ | ✓ |
| 1.1/2" | 32 – 130 | 1.3/8" – 5.1/8" | 6 pt | ✓ / ✓ | — |
| 2.1/2" | 43 – 225 | 1.5/8" – 9.1/4" | 6 pt | ✓ / ✓ | — |
| 3.1/2" | 120 – 235 | 4.5/8" – 9.1/8" | 6 pt | ✓ / ✓ | — |
| #5 Spline | 19 – 80 | 3/4" – 4" | 6 pt | ✓ / ✓ | — |
Not sure which socket you need?
Pick drive, execution and size: we generate the code of the impact socket suited to your wrench.
Rugged where it matters
Hot-forged alloy steel, machined to ISO tolerances and heat-treated for maximum impact resistance, with retaining-pin hole and o-ring.
Also available in a thin-wall version for nuts with restricted access and as power sockets for turbines and very high-torque tightening. The range is completed by extensions, adaptors, universal joints and socket sets in carrying cases.
How much torque do you need?
Estimate the tightening torque for your bolt and size the right tool with our calculator.
Indicative value — not a tightening specification.
Oil & Gas range
Explore the range
The other Maucotools solutions for the Oil & Gas site: from controlled bolting to pipe bevelling and orbital cutting.
MT-HTW torque wrenches
The hydraulic square-drive torque wrench series, up to 136,000 Nm.
12
Models
136
kNm max
±3%
Repeatability
Portable pipe bevellers PBM
Weld-edge preparation on pipe, from 20 to 609 mm diameter.
8
Models
609
mm max
ID/OD
Mounting
Orbital pipe cutters SFM
Cold orbital cutting and bevelling of pipe, up to 1,524 mm diameter.
2–60"
Diameters
1524
mm max
Split
Frame
Find the right socket
Tell us the drive, across-flats size (mm or inch) and configuration type: we'll prepare a quote with the sockets suited to your wrench.